The Zigbee modlet LED
No Lights: When the modlet is configured and commissioned to the gateway there will be no lights.
Fast Spin: If the modlet light is spinning fast, once per second, the modlet is ready to join a network.
Slow Spin: If the modlet light is spinning slow, once every 2 seconds, the modlet failed to join a network. Hold the modlet down for 7 seconds to factor reset the modlet to get it back into a fast spin.
Blinking Red Ring: The modlet has been overridden. Tap the modlet button once to exit override mode.
Solid Red Ring: The circuit is overloaded. Tap the modlet button to reset the circuit.
The modlet LED light is spinning
Solid Red Ring
Set up a Zigbee smartAC kit
Did you find this article helpful?